My Cart
My Quote

Incubator IB-25G (151L)

Catalog Number:
AAH21186U
Availability: In stock
Please contact us

Lab Companion (Jeio Tech) - Incubator IB-25G (151L)

Performance

  • Temperature ranges from ambient +5°C to 70°C.
  •  Microprocessor PID control / Temperature calibration /
    Automatic tuning.
  • Vibration-free design ideal for yeast cultivation.
    •  Air-jacked natural convection is beneficial for uniform
      temperature distribution and minimal sample contamination
      caused by external air intrusion.
  • Durable incoloy heating element with radiator fans for efficient
    heat dissipation.


Convenience

  • Intuitive control panel with bright LED display. (0.1℃resolution)
  • Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
  • Convenient preset function for 3 most commonly used
    temperature settings.
  • Convenient sample monitoring without affecting chamber
    temperature via the inner tempered-glass door.
  • Corrosion-resistant stainless-steel interior with rounded
    corners for easy cleaning and optimal airflow.
  • Fully insulated dual-wall door with magnetic rubber gasket.
  • Built-in cable port to use other instruments inside the chamber. (Diameter: 38mm, provided silicon or rubber cap)
  • RS-232 interface for external control and data collection.
  • Stackable up to 2 units using the optional stacking kit. (optional)

 

Safety

  • Automatic run after power interruption.
  • Keypad lock function prevents accidental changes during
    operation.
  • Over-temperature and over-current protection.
  • Audible and visible open-door alarms.

 

Chamber volume (L / cu ft) 151 / 5.3
Temperature
Range (℃ / ℉) Amb. +5 to 70 / Amb. +9 to 158
Fluctuation at 37℃ (±℃ / ℉) 0.2 / 0.36
Variation at 37℃ (±℃ / ℉) 0.6 / 1.08
Dimension
Interior (W x D x H, mm / inch) 610 × 460 × 540 / 24 × 18 × 21.3
Exterior (W x D x H, mm / inch) 805 × 655 × 885 / 32 × 26 × 35
No. of wire shelf (standard / max.) 2 / 11
Net weight (Kg / lbs) 62 / 136
Electrical requirements (120V, 60Hz) 6.4A
Cat. No. AAH21186U
More Information
Chamber volume 150L
Permissible Environmental Condition Temperature 5¹C to 40¹C Maximum relative humidity 80% Altitude up to 2,000m
Temperature Control PID Controlled microprocessor touch pad, Digital Display
Sensor Pt 100Ω
Heat up time 40¹C Within 45 min
Internal Stainless steel, 0.8t
External Steel, 0.8t powder coating
Shelves Stainless steel wire, electro polished
Insulation Nonflammable polystyrene (20mm/10mm)
Door Gasket Foamed silicone rubber
Inner Door Tempered safety glass (5mm)
Ventilation Slide Stainless steel, dia 38mm * 1EA
Timer Wait on time, Wait off time (Max. 99h 59m, Min. 1m)
Safety Device CLS (Custom Logical Safe) - Control System, Class II
Over temp. limit Hydraulic over temp. limit
Heater (60Hz/50Hz) Incoloy pin 700W
Interior Dimensions (mm / inch): 610×460×540 / 24×18×21.3
Exterior Dimensions (mm / inch): 805×655×885 / 32×26×35
power consumption [W] 230VAC, 50/60Hz, 3.5A
Net Weight 62kg
Temperature Range Ambient +5°C - 70°C
Temperature Accuracy ± 0.1℃ at 40℃
Write Your Own Review
You're reviewing:Incubator IB-25G (151L)