Homogenizer Mill Plus - Automated processing of up to 20 samples
Mill Plus - Automated processing of up to 20 samples
The Mill PLUS is a highly efficient homogenization system for various starting materials used for the subsequent isolation and purification of DNA, RNA or proteins. The homogenization process is based on an innovative mechanical principle for which a patent has been iled. This new process allows users to operate the Mill PLUS continuously if necessary.
Features
- Complete and reproducible homogenization; easily homogenizes even extremely resistant starting materials
- Eficient sample cooling during the whole preparation
- Very rapidly moving beads crush and disrupt the starting material
- Touch control panel and large display provide considerable operating convenience
- Pre-programmed protocols or user-deined programming with freely selectable parameters
- Compacte construction
- Can easily be operated continuously
- Comparatively quiet operation
- No tools required to operate the instrument
Efficient sample cooling: prior, during and after preparation
For the novel sample holder, which is used inside the SpeeMill PLUS, different temperature ratings are freely selectable due to the storage down to –40 °C. According to this an efficient sample cooling during the whole homogenization process is warranted and the substantial sample warming that occurs with other homogenizers is prevented. The often-problematic handling of liquid nitrogen or dry ice is thus a thing of the past. Additionally, the considerably expense factor of this additives, which have to be loaded continuously, is not applicable. Besides the sample holder allows an easy transport of the sample tubes and a long-term storage of starting or homogenized material at adequate temperatures.
Modern preparation of samples: the Mill PLUS
The samples to be processed are rapidly and efficiently homogenized in Lysis Tubes that have been specially optimized for the system and, as such, contain different and/or application-specific beads. Using beads makes it possible to completely and reproducibly homogenize even the toughest starting materials, such as cartilage and chitin shells of insects or ticks within a very short time.
2.0 mL and 0.5 mL containers (Lysis Tubes) with different beads are available for sample preparation, allowing users to adapt sample processing to a diverse range of soft and hard starting materials. Operating processes, such as loading and removing of the sample tubes, are very simple and no tools are required. In addition, user- defined protocols can be entered and saved as well as pre-installed programs are available. Homogenization parameters, like time and using cyclic routines are freely selectable.
Optimized extraction kits for the Mill Plus
The Mill Plus also accommodates kits for complete nucleic acid (DNA and RNA) isolation from various starting materials. All kits have been optimized for the Mill Plus for extremely fast and efficient nucleic acid isolation. The yields produced are impressively high and the quality of the isolated nucleic acids is outstanding. These kits contain special Lysis Tubes with application-specific beads as well as pre-made buffers.
They also contain all other components needed for isolating DNA or RNA from different starting materials. Optimizing the kits for sample processing with the Mill Plus results in extremely rapid and highly efficient nucleic acid isolation. Both the yield and quality of the nucleic acids are excellent. The standard isolation protocol requires only about 20 to 30 minutes.
Homogenization time | 30 sec to 4 min (depending on starting material) |
---|---|
DNA/RNA purification time | 20-30 min for standard protocols (complete nucleic acid purification) |
Device handling | Stand-alone device, simple starting and handling of device by using modern touch sensors |
Homogenization routines | User-defined programming with user-defined parameters, as well as pre-programmed protocols |
Sample handling | Simple sample tube loading and removal |
Sample volume | Up to 20 samples simultaneously. |
Sample cooling | Passive cooled sample holder; storage at temperatures down to -40C |
Homogenization time range | 1 sec to 4:59 min |
Steps of adjusting time | 1 sec |
Pre-programmed protocols | Yes |
User-defined protocols | Yes |
Storable protocols | 20 |
Number of cycles | 1-99 |
Protocol steps | 1-6 |
Dimensions | 154 x 275 x 257 mm |
Net Weight | 12 kg |
Power Supply | 110V, 60Hz |
power consumption [W] | 150 W (max) |
Warranty | 2 years |