Heating Bath Circulator (Jeio Tech) - CW3-10 (10L)
Catalog Number:
AAH52352U
Availability:
In stock
$2,703.65
Lab Companion (Jeio Tech) - Heat Circulator CW3-10 (10L)
Performance
- Temperature ranges from ambient +5℃to 150℃.
- Microprocessor PID control.
- Three-point temperature calibration / Automatic tuning / Automatic run.
- Accurate, stable, and efficient temperature management by using a powerful variable-speed pump.
(1 to 3 steps of pump for internal circulation and 4 to 5 steps for external circulation). - Powerful pump pressure and flow rate throughout the whole temperature range.
Convenience
- Bright VFD display with quick adjustable dial knob. (0.1℃ resolution)
- Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
- Convenient memory function of up to three frequently set temperature.
- Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless-steel bath with front access drain valve.
- RS-232 interface for external control and data collection. (RS-232 to USB serial converter is provided.)
- Side handles enables convenience handling and transport.
Safety
- Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
- Complete safety protection system with warning alarms.
- Low fluid level and dry-running, over-temperature, over-current.
- Keypad lock function prevents accidental changes during operation.
Model | CW3-05 | CW3-10 | CW3-20 | CW3-30 | |
---|---|---|---|---|---|
Bath volume (L / cu ft)
|
5 / 0.2
|
10 / 0.4
|
20 / 0.7
|
30 / 1.1
|
|
Working temperature range 2) (℃ / ℉)
|
Amb. +5 to 150 / Amb. +9 to 302
|
||||
Temperature stability 1) (±℃ / ℉)
|
0.05 / 0.09
|
0.08 / 0.14
|
|||
Pump
|
Max. pressure
|
5.9 PSI (406.8 millibar)
|
|||
Max. flow rate
|
7.4 gallons / minute (28 liters / minute)
|
||||
Dimension
|
Bath opening / depth
(W×L, D) (mm / inch)
|
150×99, 160
/ 5.9×3.9, 6.3
|
211×154, 180
/ 8.3×6.1, 7.1
|
290×214, 200
/ 11.4×8.4, 7.9
|
300×264, 230
/ 11.8×10.4, 9
|
Exterior
(W×L×H) (mm / inch)
|
220×395×424
/ 8.7×15.6×16.7
|
281×450×444
/ 11.1×17.7×17.5
|
360×510×464
/ 14.2×20.1×18.3
|
370×560×494
/ 14.6×22×19.4
|
|
Net weight (kg / lbs)
|
12.5 / 27.6
|
15 / 33
|
17.5 / 38.6
|
19.5 / 43
|
|
Electrical requirements (230V, 50/60 Hz) | 8.5A | 8.5A | 8.5A | 8.5A | |
Cat. No. | AAH52341K | AAH52351K | AAH52361K | AAH52371K | |
Electrical requirements (120V, 60 Hz) | 8.6A | 8.6A | 8.6A | 8.6A | |
Cat. No. | AAH52342U | AAH52352U | AAH52362U | AAH52372U |
- Technical data according to DIN 12876. (Bath fluid: water at 50℃)
- If you operate the unit in 1 to 3 steps of pump, the temperature range can be from Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.
Accessories
Test Tube Racks
Highly durable stainless-steel test-tube racks feature adjustable angle and tube height support without requiring any base plate. You can easily mount and release test tube racks.
Cat. No. | Description | Insert Capacity of Racks* | ||
---|---|---|---|---|
AAA44581 | for 86 test tubes | Ø8mm / Ø0.3˝ | BW-10G CW-20G/P, 30G/P RW3-2025/P, 2040/P RW-33025/P, 3040/P |
BW-20G |
AAA44582 | for 86 test tubes | Ø10mm / Ø0.4˝ | ||
AAA44583 | for 58 test tubes | Ø12mm / Ø0.5˝ | ||
AAA44585 | for 32 test tubes | Ø16mm / Ø0.6˝ | ||
AAA44586 | for 19 test tubes | Ø25mm / Ø1.0˝ | 2ea | 3ea |
AAA41531 | for 50 test tubes | Ø8mm / Ø0.3˝ | BW-05H BW-05B BW-05G |
RW3-1025/P RW3-1040/P CW3-10/P |
AAA41532 | for 50 test tubes | Ø10mm / Ø0.4˝ | ||
AAA41533 | for 33 test tubes | Ø12mm / Ø0.5˝ | ||
AAA41535 | for 16 test tubes | Ø16mm / Ø0.6˝ | ||
AAA41539 | for 10 test tubes | Ø25mm / Ø1.0˝ | 1ea | |
AAA45551 | for 176 test tubes | Ø8mm / Ø0.3˝ | BW-10H BW-10B |
BW-20H BW-20B |
AAA45552 | for 176 test tubes | Ø10mm / Ø0.4˝ | ||
AAA45554 | for 84 test tubes | Ø12mm / Ø0.5˝ | ||
AAA45556 | for 68 test tubes | Ø16mm / Ø0.6˝ | ||
AAA45561 | for 33 test tubes | Ø25mm / Ø1.0˝ | 1ea | 2ea |
Spring Wire Racks
Ideal for holding a wide variety of tubes, flasks, and other glassware. All components are made of stainless steel. (for all models)
Half-shelf Adjusters
Stainless steel perforated sample tray shelves with adjustable height support prevent leaks and guard against rust and contamination. (only for BW-H, BW-B, and BW-G Models)
Spring Wire Racks
Cat. No. | Description | Suitable for |
---|---|---|
AAA45531 | Transparent Polypropylene Gable Type | BW-05H / BW-05B |
AAA45532 | Transparent Polypropylene Gable Type | BW-10H / BW-10B |
AAA45533 | Transparent Polypropylene Gable Type | BW-20H / BW-20B |
Half-shelf Adjusters
Cat. No. | Description | Suitable for |
---|---|---|
AAA45531 | Transparent Polypropylene Gable Type | BW-05H / BW-05B |
AAA45532 | Transparent Polypropylene Gable Type | BW-10H / BW-10B |
AAA45533 | Transparent Polypropylene Gable Type | BW-20H / BW-20B |
Reservoir Capacity | 10 L |
---|---|
Temperature Range | Amb. +5°C - 150°C |
Temperature Accuracy | ± 0.05°C at 50°C |
Temperature Uniformity | ± 0.01°C at 50°C |
Heat up time | 50C within 30 minutes |
Pump Max. pressure, max. flow rate | 406.8 milibar (5.9 PSI), 28 liters/minute (7.4 gallons/minute) |
Pump Max. suction flow rate | 28,0 liters/minute (7,4 gallons/minute) |
In/out let size | 12.7mm |
Bath opening/depth (WxL/D) | 211x154/180mm |
Dimensions | 281x450x444mm(WxLxH) |
Net Weight | 15.0 / 33.1 (kg / lbs) |
Write Your Own Review