La boutique ne fonctionnera pas correctement dans le cas où les cookies sont désactivés.
Forced Convection Oven OF-12G (Discontinued)
*** Discontinued by manufacturer***
____________________________________________________________________________________________________________
Lab Companion (Jeio Tech) - Forced Convection Oven OF-12G
OF-02G (60L)
OF-12G (102L)
OF-22G (151L)
Product Information
- Application: Drying, Baking, Conditioning, Curing, Pre-Heating, Aging
- CLS - Control System and PID microprocessor controller with enhanced safety features.
- Temperature safety exceeds DIN Class II controller.
- Auto-Tuning function & Bias function - internal built-in re-calibration
- Timer: Time Delay ON / OFF (standard 99hr 59min)
- Selectable measuring temperature units ∉ and ∉
- Selectable Auto-run or Manual -run
- Audible visual and audio alarm - OT and Door Open
- Temperature range: up to + 250 ∉
- Very good uniformity and stability
- Incoloy sheath heating element is located at the rear of chamber and makes very good temperature condition
- 3 set point memories in advance: Save time without AUTO-TUNING
- RS-232 communicating interface with software
- SIRROCO FAN: Ensuring good mixing and strong dispersion of heated air flow within chamber.
- Hydraulic over temperature limit
- Over-current fuses
- Door alarm
- Smooth internal surface for easy cleaning
- Heating element and fan stop automatically when door is opened. This prevents large movement of hot air and protect operator.
- Optional: Fan speed adjuster, viewing glass, perforated shelf
Plus d’information
Capacité de la chambre |
102L |
Admissible état de l'environnement |
Température: 5 ° C à 40 ° C, humidité relative: 50% ~ 80%, Altitude: jusqu'à 2000 m |
Gamme |
Amb. +5°C ~ 100C |
Uniformité |
0.65°C @ 37°C |
Précision |
±0,1°C à 40°C |
Temps de chauffe |
50℃ en 30 minutes |
Contrôleur |
Réglage automatique PID numérique |
Capteur |
Pt 100 |
Interieur |
Acier inoxydable, 0.8t |
Externe |
Acier, 1,2t, Doublement peint et cuit |
Plateaux |
Fil d'acier inoxydable, électropolissage. |
Réchauffeur (60Hz/50Hz) |
Broche Incoloy 500W. |
Isolation |
Polystyrène 20mm |
Joint de porte |
Ruban de mousse de silicone |
Au dessus de la température limite |
Hydraulique dessus de la limite de température |
Lame de ventilation |
Acier inoxydable, diamètre 38mm * 1PC |
Dispositif de sécurité |
CLS (Custom Logical Safe) - Système de Contrôle |
Dimensions intérieures |
(mm / inch): 480×410×520 / 18.9x16.1x20.5 |
Dimensions extérieures |
(mm / inch): 657×692×870 / 25.9x27.2x34.3 |
Exigences électriques |
120V 60Hz, 2.2A |
Puissance [W] |
230VAC, 50/60Hz, 2.5A |
Poids net |
55kg |
Rédigez votre propre commentaire