Forced Convection Oven OF-22G (151L) (Discontinued)
Numéro de catalogue:
AAH12176U
Disponibilité:
En rupture de stock
***Discontinued by manufacturer***
_____________________________________________________________________________________________
Lab Companion (Jeio Tech) - Forced Convection Oven OF-22G (151L)
OF-02G (60L)
OF-12G (102L)
OF-22G (151L)
Product Information
- Application: Drying, Baking, Conditioning, Curing, Pre-Heating, Aging
- CLS - Control System and PID microprocessor controller with enhanced safety features.
- Temperature safety exceeds DIN Class II controller.
- Auto-Tuning function & Bias function - internal built-in re-calibration
- Timer: Time Delay ON / OFF (standard 99hr 59min)
- Selectable measuring temperature units ∉ and ∉
- Selectable Auto-run or Manual -run
- Audible visual and audio alarm - OT and Door Open
- Temperature range: up to + 250 ∉
- Very good uniformity and stability
- Incoloy sheath heating element is located at the rear of chamber and makes very good temperature condition
- 3 set point memories in advance: Save time without AUTO-TUNING
- RS-232 communicating interface with software
- SIRROCO FAN: Ensuring good mixing and strong dispersion of heated air flow within chamber.
- Hydraulic over temperature limit
- Over-current fuses
- Door alarm
- Smooth internal surface for easy cleaning
- Heating element and fan stop automatically when door is opened. This prevents large movement of hot air and protect operator.
- Optional: Fan speed adjuster, viewing glass, perforated shelf
| Capacité de la chambre | 150 L / 5.3 ft³ |
|---|---|
| Admissible état de l'environnement | Température: 5 ° C à 40 ° C, humidité relative: 50% ~ 80%, Altitude: jusqu'à 2000 m |
| Gamme | Amb. +5°C ~ 100C |
| Uniformité | 0.65°C @ 37°C |
| Précision | ±0,1°C à 40°C |
| Temps de chauffe | 50℃ en 30 minutes |
| Contrôleur | Réglage automatique PID numérique |
| Capteur | Pt 100 |
| Interieur | Acier inoxydable, 0.8t |
| Externe | Acier, 1,2t, Doublement peint et cuit |
| Plateaux | Fil d'acier inoxydable, électropolissage. |
| Réchauffeur (60Hz/50Hz) | Broche Incoloy 500W. |
| Isolation | Polystyrène 20mm |
| Joint de porte | Ruban de mousse de silicone |
| Au dessus de la température limite | Hydraulique dessus de la limite de température |
| Lame de ventilation | Acier inoxydable, diamètre 38mm * 1PC |
| Dispositif de sécurité | CLS (Custom Logical Safe) - Système de Contrôle |
| Dimensions intérieures | (mm / inch): 550×460×600 / 22.0x18.0x23.6 |
| Dimensions extérieures | (mm / inch): 727×742×974 / 28.7x29.2x38.3 |
| Exigences électriques | 120V 60Hz, 2.2A |
| Puissance [W] | 230VAC, 50/60Hz, 2.5A |
| Poids net | 55kg |
Rédigez votre propre commentaire