Lively 500V Power (5 – 500 / 1V) (1 – 800mA / 10mA)
Lively 500V Power (5 – 500 / 1V) (1 – 800mA / 10mA)
MBI Lab Equipment offers 3 models of power supplies constructed with microprocessor controller and 4 pairs of outlet terminals which covers the broadest range of application in general laboratory. The microprocessor control can perform either continuous or timed output, and user is able to pause and resume anytime without resetting the timer.
MBI Lively Power Supply is power enough to perform horizontal and vertical electrophoresis as well as two-dimensional electrophoresis SDS-PAGE applications. In addition, it can operate with a fully programmable mode and offer up to 6 multi-step setting conditions. The 2.4” TFT-LCD colored screen also allows you to see all the running/setting conditions while operating. For those beginners in electrophoresis, the built-in data for some typical running condition could be extremely helpful. All 3 models are designed with great safety features to ensure safety of the lab and experiment
- Four pairs of output terminals
- 2.4” TFT-LCD colored screen shows all parameters during operation
- Timer with alarm function
- Compact size with stackable case
- Constant voltage/ current/ power operation mode
- Typical Running condition helps electrophoresis beginner
- Wide application for DNA, RNA and protein electrophoresis and blotting
- Advanced safety device design
- Universal rated voltage for worldwide distributions
Specification
| Cat. No. | MP-510 |
|---|---|
| Output Voltage / Inc | 5 – 500 / 1V |
| Output Current / Inc | 1 – 800mA / 10mA |
| Power | 300W |
| Rated Voltage | 100-240V~: 47-60Hz |
| Type of Output | 1. Voltage or Current with automatic crossover 2. When target constant mode is set, system automatically adjusts the two other parameter to maximum to allow constant run (later could be changed by user) |
| Program Storage | 30 programmed files |
| Program Multi-Step | Up to 6 steps |
| Editable Program Function | 1.Typical running conditions program 2.Manual editable program |
| Display | 2.4” TFT |
| Control | Microprocessor controller |
| Safety Device | No Load detect |
| Leakage detect | |
| Over temperature protection | |
| Over load detection | |
| Sudden load change detection(could be enabled by proper setting) | |
| Shrouded plugs and sockets | |
| Timer | Constant: 9999 (min) with alarm/ Continuous Program: 999 (min) with alarm/ Continuous |
| Crossover | Yes |
| Stackable | Yes |
| Automatic Recovery After Power Failure | Yes |
| Operating Temperature | 4℃~ 40℃ |
| Material | PC housing and flame retardant ABS faceplate |
| Dimension | Approx. 8.5"x13.2"x4.1" (215 x 335 x 104 mm) |
| Weight | Approx. 4.6lb (2.1 kg) |
| Voltage | 5 – 500 / 1V |
|---|---|
| Courant | 1 - 800 mA / 10 mA |
| Puissance | 300W |
| Type de sortie | 1. Voltage or Current with automatic crossover 2. When target constant mode is set, system automatically adjusts the two other parameter to maximum to allow constant run (later could be changed by user) |
| Capacité de programmation | 30 fichiers programmés. |
| Fonction de programme éditable | 1.Typical running conditions program 2.Manual editable program |
| Chronomètre | Constant : 9999 (min) avec alarme / Programme continu : 999 (min) avec alarme / Continu |
| Volts Heures | 0 - 99 kV.h |
| Contrôles | Contrôleur à microprocesseur |
| Écran | 2.4” TFT |
| DÉTECTION SANS CHARGE | Oui |
| Détection de fuite au sol | Oui |
| Température d'opération | 4℃~ 40℃ |
| Empilable | Oui |
| Récupération automatique après une panne de courant. | Yes |
| Dimensions | Approx. 8.5"x13.2"x4.1" (215 x 335 x 104 mm) |
| Poids net | 4.6lb (2.1 kg) |
