Economic Forced Convection Oven OF-21E (Discontinued)
Numéro de catalogue:
AAH14036U
Disponibilité: En rupture de stock
***Discontinued by manufacturer***
_________________________________________________________________________________________________________
Lab Companion (Jeio Tech) - Economic Forced Convection Oven-OF-21E
OF-01E (52L)
OF-11E (100L)
OF-21E (150L)
General Information
- Application; Drying, Baking, conditioning, Curing, Pre-heating and aging
- Three models according to volume (52L,100L,150L)
- CLS - Control System and PID microprocessor controller with enhanced safety features.
- Temperature safety exceeds DIN Class II controller.
- Auto-Tuning function & Bias function - internal built-in re-calibration
- Timer: Time Delay ON / OFF (standard 99hr 59min)
- Selectable measuring temperature units ∉ and ∉
- Selectable Auto-run or Manual - run
- Audible visual and audio alarm - OT and Door Open
- Temperature range: up to + 220 ∉
- Very good uniformity and stability
- Incoloy sheath heating element is located at the bottom of chamber and makes very good temperature condition (Convenient repair without movement of the equipment)
- 3 set point memories in advance: Save time without AUTO-TUNING
- Hydraulic over temperature limit
- Over - current fuses
- Door alarm
- Smooth internal surface for easy cleaning
- Heating element and fan stop automatically when door is opened. This prevents large movement of hot air and protect operator.
- Optional: Perforated shelf
| Capacité de la chambre | 150 L / 5.3 ft³ |
|---|---|
| Admissible état de l'environnement | Température: 5 ° C à 40 ° C, humidité relative: 50% ~ 80%, Altitude: jusqu'à 2000 m |
| Gamme | 1.32000 – 1.58000 nD 0-95 %Brix |
| Uniformité | ±0.5°C |
| Précision | ±0,1°C à 40°C |
| Temps de chauffe | 50℃ en 30 mins |
| Contrôleur | 1 électronique + 1 manuel |
| Chronomètre | De 0 à 2 heures ou en continu. |
| Capteur | UV-A / VIS { illuminance UV-A Visible |
| Interieur | Acier inoxydable, 0.8t |
| Externe | Acier, 1,2t, Doublement peint et cuit |
| Plateaux | Fil d'acier inoxydable, électropolissage. |
| Réchauffeur (60Hz/50Hz) | 1000W/230V,1000W/120V |
| Isolation | Polystyrène 20mm |
| Joint de porte | Ruban de mousse de silicone |
| Au dessus de la température limite | Hydraulique dessus de la limite de température |
| Lame de ventilation | Acier inoxydable, diamètre 38mm * 1PC |
| Dispositif de sécurité | CLS (Custom Logical Safe) - Système de Contrôle |
| Dimensions intérieures | (mm / inch): 585×460×555 / 23.0x18.1x21.9 |
| Dimensions extérieures | (mm / inch): 740×625×922 / 29.1x24.6x36.3 |
| Puissance [W] | 4.5A(230VAC) |
| Poids net | 36 Kg (80 lb) |
Rédigez votre propre commentaire