Low Temperature Incubators, IL-11 (150 Liters) (Discontinued)
Numéro de catalogue:
AAH22046U
Disponibilité:
En rupture de stock
***This product has been discontinued***
Please see equivalent: Low Temperature Incubators, IL3-14 (150 Liters)
For repair and maintenance please communicate with our service department at [email protected]
__________________________________________________________________________________________
Lab Companion (Jeio Tech) - Low Temperature Incubators, IL-11 (150 Liters)
Features
- Application : Incubate biological cultures, drug stability testing
- CLS - Control System and PID microprocessor controller with enhanced safety features.
- Temperature safety exceeds DIN Class II controller.
- Auto-Tuning function & Bias function � internal built in re-calibration
- Timer : Time Delay ON / OFF (standard 99hr 59min)
- Selectable measuring temperature units ∈ and ∈
- Selectable Auto-run or Manual - run
- Audible visual and audio alarm - OT and Door Open
- Temperature range : +4∈ to + 60.0∈
- Very good uniformity and stability
- Incoloy sheath heater
- Temperature Profiling - 9 step and repeat up to 999 cyclesa
- HBP Type Compressor - low ice formation and condensation
- Automatic hot gas bypass defrost system allows continuous operation
- Adjustable fan speed
- Cross type Circular FAN for regular Temp. distribution, and Air flow is indirect way
- Step-by-step Temp. program and lock function to protect set values from changing is possible
- Magnetic packing Door makes impact relief and durable airtight for IL.
- RS-232 communication interface with software (FREE)
- Height adjustable foot for flat installation.( IL-11)
| Capacité de la chambre | 150 L / 5.3 ft³ |
|---|---|
| Conditions environnementales admissibles | Température de 5 à 40 C ¹ ¹ C Humidité relative maximum 80% de l'altitude jusqu'à 2000 m |
| Gamme de température | Amb. +4°C - 60°C |
| Précision de la température | ± 0,1 °C à 20 °C |
| Uniformité de temperature | ± 0.8°C at 100°C |
| Contrôle de la température | Régulation numérique PID à auto-ajustement |
| Chronomètre | Temps d'attente, temps de pause (max. 99 h 59 min, min. 1 min). |
| Capteur | Pt 100Ω |
| Interieur | Acier inoxydable, 0.6t |
| Externe | Acier, 0,8t avec revêtement en poudre |
| Plateaux | Fil d'acier inoxydable, électropolissage. |
| Réchauffeur (60Hz/50Hz) | Type d'aileron 600 W. |
| Isolation | Polystyrène ininflammable (20mm/10mm) |
| Au dessus de la température limite | Hydraulique dessus de la limite de température |
| Refrigerateur | 1/8Hp(HBP) |
| Dispositif de sécurité | CLS (Custom Logical Safe) - Système de Contrôle |
| Source de courant | 120VAC, 60Hz |
| Puissance [W] | 4.5A(230VAC) |
Rédigez votre propre commentaire