Mon panier
Mes devis

DS7800 Density meters for semi-automatic sample supply Set 3

Numéro de catalogue:
DS7800-3
Disponibilité: En stock
Please contact us

DS7800 Density meters for semi-automatic sample supply Set 3

 

High efficiency and special suitability for hazardous substances

In case of low-viscous to slightly viscous samples, it is possible to perform a semi-automatic sample supply and cleaning of the U-tube oscillator using a peristaltic pump. This means higher efficiency and more safety if aggressive or harmful substances are analyzed. It also improves the reproducibility of the measurement results.

  • Drying unit and peristaltic pump with high chemical resistance

  • Intuitive operation via touch-screen display

  • Easy, menu-driven adjustment

  • Pre-defined scales such as density, relative density, brix, alcohol and sulfuric acid concentration

  • Compliance with GMP/GLP, 21 CFR Part 11, pharmacopoeias (USP, BP, JP, Ph. Eur.), FDA, ISO, HACCP, OIML, ASTM, ICUMSA, NIST

 

Typical applications

A comprehensive quality assurance covering the entire production process is a must in any industrial sector. Density measurements are frequently used for this purpose, especially in the pharmaceutical, chemical, petrochemical as well as the food and beverage industry. They allow the manufacturer to analyse raw materials, semi-finished and finished products as well as the manufacturing steps in terms of a number of factors.

Density can be used to identify substances, to determine their quality or purity and to measure their concentration in binary or quasi-binary mixtures. Substance conversions and reaction dynamics can also be inferred from it. In combination with other methods such as refractometry that measures the refractive index of substances, the density measurement allows you to make precise statements about the quality of each step of the production process.

Density meters based on the oscillating U-tube method are characterized by high ease of use and are therefore used in particular for continuous density measurement and for rapid routine measurements with larger numbers of samples in laboratories.

More information about typical applications of density meters can be found in our campus article about density meters Fields of application

 

SET 3 FOR SEMI-AUTOMATIC SAMPLE SUPPLY, CONSISTING OF:

Density meter with glass U-tube oscillator
Drying unit with 3/2-way valve
Peristaltic pump
Tygon tube set for use with drying unit DS7060, consisting of:suction tube (320 mm); drain tube (320 mm); air tube (320 mm); waste tube (320 mm); tube connection Luer, 3 pieces
Tube set for peristaltic pump DS7070, consisting of: TPE pump tube (105 mm), 5 pieces; PTFE tube connection (olive), 2 pieces
Luer nozzle, 2 pieces
Luer syringe, 2 ml, 10 pieces
Luer syringe, 10 ml, 10 pieces
PE waste container with lid, 600 ml

 

Plus d’information
Plage de mesure 0–3 g/cm³
Précision de la valeur mesurée ±0,0001 g/cm³
Volume de l'échantillon par injection manuelle 0.9 ml
Température d'opération 10°C – 40°C
Temps de mesure 30 – 60 s
Température ambiante +10°C to +40°C
Calibration par le Manufacturier Avec air et eau à 9 températures chacun
Interfaces 1x USB, 1x RS-232, 1x Ethernet
Méthodes Un nombre pratiquement illimité de méthodes peuvent être définies.
Rédigez votre propre commentaire
Vous commentez :DS7800 Density meters for semi-automatic sample supply Set 3
densitymeter (2.40 MB)