Ductless Fume Hoods DLH-11G
Ductless Fume Hoods DLH-11G
Performance
- A variety of filters and work surfaces available to suit your specific experimental needs. (refer to accessory section)
- High-quality polyester fiber pre-filter for trapping larger particles and increasing the life of the main HEPA filter.
- Large-capacity blower maintaining sufficient intake flow rate and reducing noise. (less than 55 dB under normal operation)
- Fluorescent light installed outside the workspace in order to prevent the airflow hindrance as well as the contamination while maintaining illumination intensity.
Convenience
- Easy monitoring of the internal airflow speed thanks to built-in anemometer.
- Comfortable front access to cartridge type of filters for easy replacement.
- Built-in utility hole for easily routing the cords or wires of the equipment placed inside the hood.
- Fully or half openable front door for convenient transport of experimental apparatuses and equipment into or out of the workspace.
Safety
- Efficiency and capacity of activated carbon filters: BS 7989:2001
- Structure, electrical outlet, lighting, and sound level: BS 7258-1:1994
- Local smoke, large volume visualization, face velocity, and tracer gas: ANSI/ASHRAE 110-1995 and NF EN 14175-
| Model | DLH-11G | ||
|---|---|---|---|
|
Controller |
Microprocessor control |
||
|
Face velocity |
Initial set point: 0.4m/s, 80fpm |
||
|
Air flow meter |
Swing vane type |
||
|
Main filter |
Chemical Filter (optional 6 different filters) |
||
|
Pre filter |
Washable high efficiency nylon filter |
||
|
Materials |
Main body, window (front / side) |
2.0mm steel (epoxy powder-coated), 8mm / 6mm thick acrylic resin |
|
|
Work surface |
Optional 6 different work surfaces |
||
|
Fluorescent light intensity |
> 600lux |
||
|
Noise level |
55dB under normal operation |
||
|
Dimension(W×D×H) |
Interior (mm / inch) |
1180×640×800 / 46.5×25.2×31.5 |
|
|
Exterior without stand (mm / inch) |
1200×660×1250 / 47.2×26×49.2 |
||
|
Exterior with stand (mm / inch) |
1200×660×1985 / 47.2×26×78.1 |
||
|
Net weight (body) (kg / lbs) |
118 / 260.1 |
||
|
Net weight (body + stand) (kg / lbs) |
140 / 308.6 |
||
|
Electrical requirements (230V) |
50Hz, 0.6A | 60Hz, 0.7A | |
|
Cat. No. |
AAHB2012K | AAHB2012K | |
|
Electrical requirements (100V, 120V) |
100V, 50Hz, 1.5A | 120V, 60Hz, 1.3A | |
|
Cat. No. |
AAHB2014U | AAHB2013U | |
| Airflow Type | Swing vane type |
|---|---|
| Air Volume | 0 to 1020 cmh / 0 to 600 cfm |
| Laminar Air Velocity | 0.3 / 59 |
| Air Cleanliness within Working Area | ISO 14644-1 Class 4, US Federal Standard 209E Class 10 |
| HEPA Filter | Chemical Filter (optional 6 different filters) |
| Pre-Filter | Washable high efficiency nylon filter |
| Noise Level | 55dB under normal operation |
| Working Surface Materials | Optional 6 different work surfaces |
| Front/ Side Windows Materials | 2.0mm steel (epoxy powder-coated), 8mm / 6mm thick acrylic resin |
| Illumination Intensity | > 600lux |
| Exterior Dimensions | 1200×660×1250 / 47.2×26×49.2 |
| Interior Dimensions | 1180×640×800 / 46.5×25.2×31.5 |
| Net Weight | 118 / 260.1 |
| Power Supply | 120V, 60Hz, 1.3A |
