Incubator IB-15G (102L)
Catalog Number:
AAH21176U
Availability:
Out of stock
Lab Companion (Jeio Tech) - Incubator IB-15G (102L)
Performance
- Temperature ranges from ambient +5°C to 70°C.
- Microprocessor PID control / Temperature calibration /
Automatic tuning. - Vibration-free design ideal for yeast cultivation.
- Air-jacked natural convection is beneficial for uniform
temperature distribution and minimal sample contamination
caused by external air intrusion.
- Air-jacked natural convection is beneficial for uniform
- Durable incoloy heating element with radiator fans for efficient
heat dissipation.
Convenience
- Intuitive control panel with bright LED display. (0.1℃resolution)
- Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
- Convenient preset function for 3 most commonly used
temperature settings. - Convenient sample monitoring without affecting chamber
temperature via the inner tempered-glass door. - Corrosion-resistant stainless steel interior with rounded
corners for easy cleaning and optimal airflow. - Fully insulated dual-wall door with magnetic rubber gasket.
- Built-in cable port to use other instruments inside the chamber. (diameter: 38mm, provided silicon or rubber cap)
- RS-232 interface for external control and data collection.
- Stackable up to 2 units using the optional stacking kit. (optional)
Safety
- Automatic run after power interruption.
- Keypad lock function prevents accidental changes during
operation. - Over-temperature and over-current protection.
- Audible and visible open-door alarms.
| Chamber volume (L / cu ft) | 102 / 3.6 |
|---|---|
| Temperature | |
| Range (℃ / ℉) | Amb. +5 to 70 / Amb. +9 to 158 |
| Fluctuation at 37℃ (±℃ / ℉) | 0.1 / 0.18 |
| Variation at 37℃ (±℃ / ℉) | 0.2 / 0.36 |
| Dimension | |
| Interior (W x D x H, mm / inch) | 480 × 410 × 520 / 18.9 × 16.1 × 20.5 |
| Exterior (W x D x H, mm / inch) | 675 × 605 × 855 / 27 × 24 × 34 |
| No. of wire shelf (standard / max.) | 2 / 11 |
| Net weight (Kg / lbs) | 55 / 121 |
| Electrical requirements (120V, 60Hz) | 4.6A |
| Cat. No. | AAH21176U |
| Chamber volume | 102L |
|---|---|
| Permissible Environmental Condition | Temperature 5¹C to 40¹C Maximum relative humidity 80% Altitude up to 2,000m |
| Temperature Control | PID Controlled microprocessor touch pad, Digital Display |
| Sensor | Pt 100Ω |
| Heat up time | 40¹C Within 45 min |
| Internal | Stainless steel, 0.8t |
| External | Steel, 0.8t powder coating |
| Shelves | Stainless steel wire, electro polished |
| Insulation | Nonflammable polystyrene (20mm/10mm) |
| Door Gasket | Foamed silicone rubber |
| Inner Door | Tempered safety glass (5mm) |
| Ventilation Slide | Stainless steel, dia 38mm * 1EA |
| Timer | Wait on time, Wait off time (Max. 99h 59m, Min. 1m) |
| Safety Device | CLS (Custom Logical Safe) - Control System, Class II |
| Over temp. limit | Hydraulic over temp. limit |
| Heater (60Hz/50Hz) | Incoloy pin 500W |
| Interior Dimensions | (mm / inch): 480×410×520 / 18.9×16.1×20.5 |
| Exterior Dimensions | (mm / inch): 675×605×855 / 27×24×34 |
| power consumption [W] | 230VAC, 50/60Hz, 2.5A |
| Net Weight | 55kg |
| Temperature Range | Ambient +5°C - 70°C |
| Temperature Accuracy | ± 0.1℃ at 40℃ |
Write Your Own Review
