Flame Photometer for Process FP8500
Flame Photometer for Process FP8500
Process version
The FP8500 combines the characteristics of the FP8400 with an automatic calibration to realize a 24 hour fully automated measurement operation; measuring times between 1 second and several minutes are possible. For data transmission, a variety of interfaces are available.
With the models of the FP8000 series, A.KRÜSS Optronic presents to this day unique measuring devices for the simultaneous measurement of the elements Na, K, Ca and Li. Five measuring channels are available for this, which can be individually configured. Thanks to proven measuring methods and modern device electronics, our flame photometers achieve high-precision and reproducible measurement results and are a simple and particularly cost-effective alternative to analysis techniques such as ICP or AAS.
- Reliable, simultaneous measurement of up to five alkaline and alkaline earth elements
- Remote control of several devices via central process computer
- Suitable for 24-hour operation
- Very high precision
- Maximum operational safety through intelligent security mechanisms
- User administration with two authorization levels
- Full traceability of the measurement results
- Extensive interfaces and convenient data transfer
- Compliance with international standards such as GMP / GLP and 21 CFR Part 11
Typical applications
- Process analysis
- Process monitoring
- Online measurement
- Automated continuous measurement
|
FP8500 |
Na |
K |
Li |
Ca |
|
MEASURING RANGE |
0.01-4500 ppm
|
0.01-4500 ppm
|
0.01-4500 ppm
|
0.50-4500 ppm
|
|
DETECTION LIMIT |
0.01 ppm
|
0.01 ppm
|
0.01 ppm
|
0.03 ppm
|
|
PRECISION |
0.2 % at 40 ppm
|
0.2 % at 40 ppm
|
0.2 % at 40 ppm
|
0.2 % at 40 ppm
|
|
ACCURACY |
1 % at 40 ppm
|
1 % bei 40 ppm
|
1 % at 40 ppm
|
1 % at 40 ppm
|
|
CALIBRATION |
|
|||
|
DRIFT |
1% in 60 min |
|||
|
REFERENCE |
Lithium guide line with 35 mg/l or 5 mmol/l |
|||
|
SAMPLE VOLUME |
2,5 ml |
|||
|
COMBUSTION GAS |
Propane, Butane or LPG: Recommended for alkaline elements
|
|||
|
DISPLAY |
TFT-Display with integrated 8,4“TFT touchscreen, 800x600 Pixel |
|||
|
INTERFACES |
|
|||
|
EQUIPMENT |
Base unit + External valve box with control unit (Online Measurement) |
|||
|
ACCESSORIES |
|
|||
|
UPGRADEABILITY |
Retrofit kits to other models available |
|||
| MEASURING RANGE Na | 0.01-4500 ppm |
|---|---|
| MEASURING RANGE K | 0.01-4500 ppm |
| MEASURING RANGE Li | 0.01-4500 ppm |
| MEASURING RANGE Ca | 0.50-4500 ppm |
| DETECTION LIMIT Na | 0.01 ppm |
| DETECTION LIMIT K | 0.01 ppm |
| DETECTION LIMIT Li | 0.01 ppm |
| DETECTION LIMIT Ca | 0.03 ppm |
| PRECISION Na | 0.2 % at 40 ppm |
| PRECISION K | 0.2 % at 40 ppm |
| PRECISION Li | 0.2 % at 40 ppm |
| PRECISION Ca | 0.2 % at 40 ppm |
| ACCURACY Na | 1 % at 40 ppm |
| ACCURACY K | 1 % at 40 ppm |
| ACCURACY Li | 1 % at 40 ppm |
| ACCURACY Ca | 1 % at 40 ppm |
| Calibration | Linear with 2 standards Non linear with 6-8 standards, cubic approximation |
| Sample volume | 2,5 ml |
| Display | TFT-Display with integrated 8,4“ TFT touchscreen, 800x600 Pixel |
| Interface | 2 x USB flash drive 1 x Ethernet 1 x RS-232 for printer Upgrade 4-20 mA analogue, passive current interface |
