Flame Photometer for the Laboratory FP8400
Flame Photometer for the Laboratory FP8400
Economic entry-level model for the laboratory
The flame photometer FP8400 is the standard version for a variety of laboratory applications and offers a very simple operation in combination with very high precision and application flexibility in determining the concentration of alkali and alkaline earth elements in aqueous solutions.
With the models of the FP8000 series, A.KRÜSS Optronic presents to this day unique measuring devices for the simultaneous measurement of the elements Na, K, Ca and Li. Five measuring channels are available for this, which can be individually configured. Thanks to proven measuring methods and modern device electronics, our flame photometers achieve high-precision and reproducible measurement results and are a simple and particularly cost-effective alternative to analysis techniques such as ICP or AAS.
- Reliable, simultaneous measurement of up to five alkaline and alkaline earth elements
- For operation with low sample volume
- Very high precision
- Maximum operational safety through intelligent security mechanisms
- User administration with two authorization levels
- Full traceability of the measurement results
- Extensive interfaces and convenient data transfer
- Compliance with international standards such as GMP / GLP and 21 CFR Part 11
Typical applications
- Quality control in the pharmaceutical, chemical, beverage, food, salt and construction industries
- Evidence
- Food laboratories, testing laboratories and testing offices
- Chemical development
Model Specifications
|
FP8400 |
Na |
K |
Li |
Ca |
|
MEASURING RANGE |
0.01-4500 ppm
|
0.01-4500 ppm
|
0.01-4500 ppm
|
0.50-4500 ppm
|
|
DETECTION LIMIT |
0.01 ppm
|
0.01 ppm
|
0.01 ppm
|
0.03 ppm
|
|
PRECISION |
0.2 % at 40 ppm
|
0.2 % at 40 ppm
|
0.2 % at 40 ppm
|
0.2 % at 40 ppm
|
|
ACCURACY |
1 % at 40 ppm
|
1 % bei 40 ppm
|
1 % at 40 ppm
|
1 % at 40 ppm
|
|
CALIBRATION |
|
|||
|
DRIFT |
1% in 60 min |
|||
|
REFERENCE |
Lithium guide line with 35 mg/l or 5 mmol/l |
|||
|
SAMPLE VOLUME |
2.5 ml |
|||
|
COMBUSTION GAS |
Propane, Butane or LPG: Recommended for alkaline elements
|
|||
|
DISPLAY |
TFT-Display with integrated 8,4“TFT touchscreen, 800x600 Pixel |
|||
|
INTERFACES |
2 x USB |
|||
|
EQUIPMENT |
Basic model |
|||
|
ACCESSORIES |
|
|||
|
UPGRADEABILITY |
Retrofit kits to other models available |
|||
| MEASURING RANGE Na | 0.01-4500 ppm |
|---|---|
| MEASURING RANGE K | 0.01-4500 ppm |
| MEASURING RANGE Li | 0.01-4500 ppm |
| MEASURING RANGE Ca | 0.50-4500 ppm |
| DETECTION LIMIT Na | 0.01 ppm |
| DETECTION LIMIT K | 0.01 ppm |
| DETECTION LIMIT Li | 0.01 ppm |
| DETECTION LIMIT Ca | 0.03 ppm |
| PRECISION Na | 0.2 % at 40 ppm |
| PRECISION K | 0.2 % at 40 ppm |
| PRECISION Li | 0.2 % at 40 ppm |
| PRECISION Ca | 0.2 % at 40 ppm |
| ACCURACY Na | 1 % at 40 ppm |
| ACCURACY K | 1 % at 40 ppm |
| ACCURACY Li | 1 % at 40 ppm |
| ACCURACY Ca | 1 % at 40 ppm |
| Calibration | Linear with 2 standards Non linear with 6-8 standards, cubic approximation |
| Sample volume | 2,5 ml |
| Display | TFT-Display with integrated 8,4“ TFT touchscreen, 800x600 Pixel |
| Interface | 2 x USB flash drive 1 x Ethernet 1 x RS-232 for printer |
