Incubated Shakers (Floor Standing Models) ISF-7100-R (Refrigerated)

The JEIO TECH ISF-7100-R Refrigerated Incubated Shaker is a large-capacity, floor-standing orbital incubator engineered for applications requiring both sub-ambient and elevated temperature control. With a 270 L chamber, a broad temperature range from ambient −20°C (minimum 4°C) to 80°C, and precise 30–500 RPM orbital shaking, the ISF-7100-R supports high-load sample processing across a wide spectrum of protocols. Its intuitive touch screen LCD controller, patented DD shaking system, CFC-free R-600a refrigerant, and smart self-diagnostic capabilities make it an ideal platform for cell culture, microbiology, protein expression, and automated dosing or sampling workflows.

• Refrigerated Temperature Control: Broad range from ambient −20°C (minimum 4°C) to 80°C, enabled by a 1/6 Hp HBP compressor with CFC-free R-600a eco-friendly refrigerant.
• Automatic Defrost: Built-in defrost function maintains performance at low temperatures; recommended when setpoint is below 25°C.
• Large-Capacity Chamber: 270 L (9.5 cu. ft.) interior with a 755 × 520 mm platform accommodates high-volume and high-load sample processing.
• Intuitive Touch Screen LCD Controller: Easy-to-navigate color display with logical icon-based menus for straightforward programming and monitoring.
• Three Operating Modes: Temperature & Shaking, Temperature only, or Shaking only—flexible configuration for diverse experimental needs.
• Patented DD Shaking System: Powerful direct-drive brushless motor with triple cam system delivers stable, uniform orbital motion even under heavy loads up to 35 kg.
• Smart Self-Diagnosis: Real-time monitoring of rpm and temperature deviations with automatic alarm, auto-adjust, and auto-stop functions.
• Automatic Speed Adjustment: System compensates for excessive workload, unbalanced loads, unstable floors, or external shocks without user intervention.
• Soft Start & Soft Stop: Smooth acceleration and deceleration prevent chemical spills from flasks and test tubes.
• Home Position Stop: Platform always returns to the same starting position—highly beneficial for automated dosing or sampling processes.
• Front-Inclined Lid Design: Patented lid structure lowers gently toward the front for easy loading and unloading of large sample volumes.
• Transparent Viewing Window: Clear top window with bright LED lamps allows sample monitoring without disturbing chamber conditions.
• Gas Spring Lid Support: Smooth, soft-opening and closing motion for safe, effortless access.
• Triple Independent Temperature Protection: Temperature deviation alarm (High/Low), electronic temperature limiter (High/Low), and mechanical over-temperature limiter (High) for fail-safe operation.
• Overcurrent Protection: Restricts operation when objects obstruct the platform or shaking becomes impossible.
• Controller Lock Function: Prevents accidental setting changes during long runs.
• Non-Volatile Memory: Automatic restart resumes operation exactly as configured after a power interruption.
• Built-in Connectivity: RS-232 and USB ports for external control and data collection; compatible with LC Connected mobile monitoring (requires LC GreenBox).
• 21 CFR Part 11 Compliance: Optional LC DataKeeper software integration for GMP audit readiness.
• Easy Maintenance: Spill drain port with quick-disconnect valve simplifies cleanup and maintains internal hygiene.
• Uniform Thermal Distribution: Three-step adjustable high-velocity fan ensures rapid thermal recovery after door opening.
• Corrosion-Resistant Interior: Stainless steel chamber withstands aggressive cleaning protocols.
• Lockable Air-Tight Door: Silicone gasket seal secures samples and maintains stable chamber atmosphere.
• Mobile Design: Sturdy foot casters allow easy relocation during installation or lab reconfiguration.

The ISF-7100-R continuously monitors its own operational health through real-time self-diagnostics. If the actual rpm or temperature deviates from set values, an audible and visible alarm activates immediately. The system automatically adjusts shaking speed when instability is detected—whether from high rpm, overload, weight imbalance, or external vibration. An overcurrent protection device restricts operation if the platform is obstructed, while the triple independent temperature protection (deviation alarm, electronic limiter, and mechanical over-temperature limiter) ensures sample safety even in the event of electronic failure.

• AAA23503-V3 — Universal platform
• AAA23550 – AAA23559 — Stainless steel flask clamps (50 mL – 6 L)
• AAA30570 – AAA30577 — Plastic flask clamps (50 mL – 2 L)
• AAA23562 – AAA23565 — Funnel clamps (250 mL – 2 L)
• AAA23634 — Dedicated platform with 39 × 250 mL clamps
• AAA23635 — Dedicated platform with 28 × 500 mL clamps
• AAA23581 – AAA23594 — Test tube racks (Ø8 mm – Ø50 mm)
• AAA23651 – AAA23654 — Microplate holders (Tower, Flat A/B, Single)
• AAA23534 — Non-skid rubber mat
• AAA23514 — Spring wire rack
• AAA23505 — Universal attachment (utility carrier)
• AAA30551 — Lab sticker (200 × 200 mm)
• AAHQ1011K — LC GreenBox (mobile monitoring)
• SSA11001 / SSA11002 — LC DataKeeper Basic / Pro (21 CFR Part 11)

The ISF-7100-R is designed for large-scale biological growth and processing applications requiring both low-temperature and elevated temperature control with simultaneous agitation. It is ideal for cell culture, microbiology, bacteriology, tissue culture, protein expression, fermentation studies, entomology, egg hatching, hybridization washes, and any protocol involving automated dosing or sampling where precise home-position stopping is critical. Its refrigerated capability, high-load capacity, and robust construction make it equally suited for pharmaceutical development, academic research, and industrial biotechnology facilities.

Note: Use of the defrost function is recommended when temperature control is set below 25°C. Plastic flask clamps may deform at temperatures over 40°C; stainless steel clamps are recommended for high-temperature operation. Accessories and platforms are sold separately—contact Montreal Biotech to configure the system for your specific vessel requirements.