Flame Photometer - Automatic Unit Without Dilution FP8600
Flame Photometer - Automatic Unit Without Dilution FP8600
Fully automatic measurement
Laboratory version supplemented by a rotation sampler with up to 72 sample positions. Once programmed, the FP8600 automatically measures up to 72 samples in one run. Especially control laboratories and testing offices benefit from this independent operation.
With the models of the FP8000 series, A.KRÜSS Optronic presents to this day unique measuring devices for the simultaneous measurement of the elements Na, K, Ca and Li. Five measuring channels are available for this, which can be individually configured. Thanks to proven measuring methods and modern device electronics, our flame photometers achieve high-precision and reproducible measurement results and are a simple and particularly cost-effective alternative to analysis techniques such as ICP or AAS.
- Reliable, simultaneous measurement of up to five alkaline and alkaline earth elements
- Automatic operation for high sample volumes
- Sample delivery without dilution
- Little care needed by the user
- Very high precision
- Maximum operational safety through intelligent security mechanisms
- User administration with two authorization levels
- Full traceability of the measurement results
- Extensive interfaces and convenient data transfer
- Compliance with international standards such as GMP / GLP and 21 CFR Part 11
Typical applications
- Quality control in the pharmaceutical, chemical, beverage, food, salt and construction industries
- Evidence
- Food laboratories, testing laboratories and testing offices
- Chemical development
Model Specifications
|
FP8600 |
Na |
K |
Li |
Ca |
|
MEASURING RANGE |
0.01-4500 ppm
|
0.01-4500 ppm
|
0.01-4500 ppm
|
0.50-4500 ppm
|
|
DETECTION LIMIT |
0.01 ppm
|
0.01 ppm
|
0.01 ppm
|
0.03 ppm
|
|
PRECISION |
0.4 % at 40 ppm
|
0.4 % at 40 ppm
|
0.4 % at 40 ppm
|
0.4 % at 40 ppm
|
|
ACCURACY |
1 % at 40 ppm
|
1 % bei 40 ppm
|
1 % at 40 ppm
|
1 % at 40 ppm
|
|
CALIBRATION |
|
|||
|
DRIFT |
1% in 60 min |
|||
|
REFERENCE |
Lithium guide line with 35 mg/l or 5 mmol/l |
|||
|
SAMPLE VOLUME |
2,5 ml |
|||
|
COMBUSTION GAS |
Propane, Butane or LPG: Recommended for alkaline elements
|
|||
|
DISPLAY |
TFT-Display mit integriertem 8,4“TFT Touchscreen, 800 x 600 Pixel |
|||
|
INTERFACES |
|
|||
|
EQUIPMENT |
Basic model +
|
|||
|
ACCESSORIES |
|
|||
|
UPGRADEABILITY |
Retrofit kits to other models available |
|||
| MEASURING RANGE Na | 0.01-4500 ppm |
|---|---|
| Plage de mesure K | 0.01-4500 ppm |
| MEASURING RANGE Li | 0.01-45000 ppm |
| MEASURING RANGE Ca | 0.50-45000 ppm |
| LIMITES DE DÉTECTION Na | 0.01 ppm |
| LIMITES DE DÉTECTION K | 0.01 ppm |
| LIMITES DE DÉTECTION Li | 0.01 ppm |
| LIMITES DE DÉTECTION Ca | 0.03 ppm |
| Précision du sodium. | 0.4 % at 40 ppm |
| Précision du potassium. | 0.4 % at 40 ppm |
| Précision du lithium. | 0.4 % at 40 ppm |
| Précision du calcium. | 0,4 % à 40 ppm. |
| PRÉCISION Na | 1 % à 40 ppm |
| PRÉCISION K | 1 % à 40 ppm |
| PRÉCISION Li | 1 % à 40 ppm |
| PRÉCISION Ca | 1 % à 40 ppm |
| Calibration | Linéaire avec 2 étalons. Non linéaire avec 6-8 étalons, approximation cubique. |
| Volume d'échantillon | 2,5 ml |
| Écran | "Écran TFT intégré de 8,4 pouces avec écran tactile, 800x600 pixels |
| Interface | 2 x clé USB 1 x Ethernet 1 x RS-232 pour imprimante |
