MBI Winpact Parallel System (FS-05 Series)
MBI Winpact Parallel System (FS-05 Series)
Winpact Parallel Fermentation System is the ultimate and true parallel system for your parallel experiment. Whether you need to run two identical experiments or different experiments at once, the duo heating system allows you to run two thermostat heating, two dry heating or one thermostat and one dry heating simultaneously.
This state-of-the-art fermenter/bioreactor is constructed with the upmost versatility and flexibility to work with all types and sites of Winpact vessels. The remote control software can control up to 16 fermentors for true parallel operation.
A. Single control interface for left and right vessel
B. USB port for easy data transfer
C. Power switch
D. 8 x Assignable & speed adjustable peristaltic pumps
E. Adjustable air flow meter
MajorScience Winpact Parallel Fermentation System (FS-05)
Features
Controller:
- Duo heating system, thermostat and dry heating combined in one
- True Parallel System, 1 controller controls 2 vessels
- Five Interchangeable types of autoclavable glass vessel
- Control up to 16 systems from a single interface
- Compatible with microbial and cell culture applications
- Intuitive user interface for short learning time
- Ethernet communication with Winpact SCADA software, and IP addressing
- Full selection of optional devices available
- Compatible with solid state vessel with auto vessel angle control mechanism
Autoclavable glass vessel:
- Five Interchangeable types of autoclavable glass vessel
- Compatible with vessel volume from 0.5L to 20L
- Remote control software connects up to 16 systems (total 32 vessels) at the same time via PC
- Intuitive Winpact interface for easy operation
1.Single wall dish bottom vessel, 1L
2.Double jacketed dish bottom vessel, 3L
3.Single wall air lifter vessel, 5L
4.Double jacketed air lifter vessel, 5L
5.Single wall dish bottom vessel with heating blanket, 5L
6.Single wall plain bottom vessel with heating base unit, 10L
Control panel |
10.4" Color touch-screen interface |
Communication port |
Remote software control through Ethernet, up to 16 systems per PC Data export through USB port Analog AUX port for system extension |
Program storage |
Up to 59,994 process programs |
Log data storage |
Up to 100 process monitoring data files |
Cabinet material |
ABS front panel and painted iron housing |
Dimension |
Footprint: W x L = 15.75" x 21.61" (400 mm x 549 mm); Height: 29.14" (740 mm) |
Rated voltage |
220V~; 50/60 Hz, 10A, 2000W |
Weight |
Approx. 114.6 lb (52 kg) |
Inlet gas flow-meter |
0,0.1-1 LPM (500 ml); 0, 0.2-2.5 LPM (1 L); 0, 1-10 LPM (3, 5 L); 0, 2-25 LPM (10 L); 0, 6-50 LPM (15, 20 L) |
Sparger |
L-shape (500ml, 1L); Ring sparger (3L and above); Micro-sparger (C type vessels); Center-located sparger (solid state) |
Baffle |
316L stainless steel baffles • 0.5-3L vessel: fixed, unmovable • 5L and above vessel: removable |
Heating |
1. Thermostat system: built-in heat exchanger (550W heater, water circulation pump) 2. Dry heating system : external devices (heating blanket or heating base unit) |
Cooling |
Built-in water module and external water circulator (optional) |
Range |
- FS-V-A/ B / SA05P series: 5℃ (41℉) above coolant up to 60℃ (140℉) - FS-V-C series (Double Jacketed): 5℃ (41℉) above coolant up to 60℃ (140℉) - FS-V-C series (Single Wall): without temp control - FS-V-D series : 5℃ (41℉) above coolant up to 90℃ (194℉) * Antifreeze is required to apply |
Probe |
Platinum RTD probe (PT-100), non autoclavable |
Control mode |
Manual or programmable 15-step PID control |
Drive |
Removable top brushless motor |
Speed range |
a. For Pitched blade impeller: 30-300 rpm b. For Rushton impeller: 30-1800 rpm(0.5, 1L); 30-1200 rpm(3, 5L); 30-1000 rpm(10L); 30-700 rpm(15, 20L) c. For Broken type/Spiral type/Anchor type impellers (only for FS-V-SA05 vessel): 1 – 60 rpm** |
Resolution |
1 rpm increment |
Impeller |
2 impellers for 0.5-1 L vessel and 0.5-5 L Double Jacketed Vessel 3 impellers for 3 L vessel and above; for 10 L Double Jacketed Vessel Note: customized impellers are available upon ordering |
Control mode |
Manual or programmable 15-step PID control with adjustable deadband |
Range |
0 -14 (2-12 for maximum precision) |
Resolution |
0.01 pH |
Probe |
Gel-filled electrode, autoclavable |
Control mode |
Manual/acid start/progrmmable 15-step PID control |
Range |
0-200%, Control range: 0-100%, adjustable |
Resolution |
0.1% |
Probe |
Polarographic DO sensor; autoclavable |
Control mode
|
• 2-stage DO cascade response a. Increase or decrease agitation speed b. Supply external oxygen source (oxygen enrichment module required, optional device) c. Adjust DO level using gas mixing control (gas mixing station module required, optional device) • Substrate feeding strategy • DO Stat with smart feeding technology |
Measurement range |
± 2000 mV |
Resolution |
1 mV |
Probe |
Gel-filled electrode: autoclavable |
Probe |
316L stainless steel protector with insulated PTFE tube; autoclavable, adjustable sensitivity control |
Control mode |
Foam: on/off switch Level: on/off switch control with wet/dry probe set up |
Pump number |
4 built-in Watson Marlow pumps per vessel (total 8); Total 4 external pumps expandable: • 2 external pumps: MU-D series required (optional) • 2 external pumps: 4-20mA or DC 0-10V analog input **The minimum speed varies from 1-5 rpm depending on the medium viscosity. |
Motor type |
Precise stepping motor; minimum speed is 1 rpm |
Speed range |
0 - 65 rpm |
Resolution |
1 rpm |
Control mode |
Manual or programmable 15-step feeding control; pump can be assigned for acid, base, antifoam and substrate |
Device type |
316L stainless steel condenser |
Control unit |
|
||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Aeration |
|
||||||||||||||||
Temperature |
|
||||||||||||||||
Agitation |
|
||||||||||||||||
pH |
|
||||||||||||||||
DO |
|
||||||||||||||||
ORP (optional) |
|
||||||||||||||||
Foam / level |
|
||||||||||||||||
Peristaltic pump |
|
||||||||||||||||
Exhaust |
|
Catalog Number | Product Name | Price | Qty |
---|---|---|---|
FS-V-A | Double Jacked Dish Bottom Vessel (FS-V-A series) 500ml-10L |
|
|
FS-V-B | Single Wall Dish Bottom Vessel (FS-V-B series) 1-10L |
|
|
FS-V-C | Air Lifter Vessel (FS-V-C series) 5L only, single wall or double jacketed |
|
|
Serie FS-V-B | Single Wall Dish Bottom Vessel with Heating Blanke (FS-V-B series) 1 - 20L |
|
|
FS-V-D | Single Wall Plain Bottom Vessel with Heating Base Unit (FS-V-D series) 3 - 10L |
|
|
FS-V-SA05P | Solid State (FS-V-SA05P) 5L only |
|